Volume 6 - 2020

The influence of fuel surface roughness on ignition in the mining industry – an exploratory analysis

Rickard Hansen, Nicholas Dembsey
Publication date: January 2020
Page(s): 1-17
DOI: 10.11159/ijmmme.2020.001

Optimization of Processing parameters on Low Temperature Plasma Nitriding of AISI 420 Martensitic Stainless Steel

Insup Lee
Publication date: February 2020
Page(s): 18-26
DOI: 10.11159/ijmmme.2020.002

Influence of Sn on practical performances of structural steels

Kazuki Inujima, Kazutoshi Ichikawa
Publication date: March 2020
Page(s): 27-34
DOI: 10.11159/ijmmme.2020.003

Study and Comparison of the Thermomechanical Response of Geopolymeric and Conventional Concretes

F.A. Huamán-Mamani, J.F. Gamarra-Delgado, J.J. Paredes-Paz, V.C. Bringas-Rodríguez, D.L. Mayta-Ponce, G.P. Rodríguez-Guillén
Publication date: October 2020
Page(s): 35-42
DOI: 10.11159/ijmmme.2020.004

Evaluation of Creep Parameters in Geopolymers Derived From Mining Industry Waste

F.A. Huamán-Mamani, J.F. Gamarra-Delgado, J.J. Paredes-Paz, V.C. Bringas-Rodríguez, D.L. Mayta-Ponce, G.P. Rodríguez-Guillén
Publication date: October 2020
Page(s): 43-51
DOI: 10.11159/ijmmme.2020.005

Mechanical and Thermomechanical Behavior Of Sic/Si Compounds Subjected To Controlled Atmospheric Conditions

J.F. Gamarra-Delgado, J.J. Paredes-Paz, V.C. Bringas-Rodríguez, D.L. Mayta-Ponce, G.P. Rodríguez-Guillén, F.A. Huamán-Mamani
Publication date: October 2020
Page(s): 52-59
DOI: 10.11159/ijmmme.2020.006