International Journal of Mining, Materials, and Metallurgical Engineering (IJMMME)

International Journal of Mining, Materials, and Metallurgical Engineering (IJMMME)

ISSN: 2562-4571

Current Volume 8 - 2022

Solid-Liquid Interdiffusion Bonding between Ti/Ni/Ag/Sn Backside Metallized Si Chips and Cu/Al2O3 - DBC Substrates with Au/Pd/Ni Surface Finish

Kuan-Yu Chiu, Pei-Ing Lee
Publication date: February 2022
Page(s): 1-7
DOI: 10.11159/ijmmme.2022.001

Mechanism of the Evaporation of Ag Nano-Twinned Films on Si Wafers with Assistance of Ion Beam Bombardment

Tung-Han Chuang, Yin-Hsuan Chen, Po-Ching Wu
Publication date: December 2022
Page(s): 08-15
DOI: 10.11159/ijmmme.2022.002

Volume 7 - 2021

Design Fire Scenarios Involving Non-Fire Resistant Conveyor Belts – Numerical Study

Rickard Hansen
Publication date: March 2021
Page(s): 1-15
DOI: 10.11159/ijmmme.2021.001

Characterization of (111)-Oriented Ag Nano-twinned Films on (111) Si Substrates

Po-Ching Wu, Pei-Ing Lee, Yu-Chang Lai, Tung-Han Chuang
Publication date: March 2021
Page(s): 16-21
DOI: 10.11159/ijmmme.2021.002

Improving the Solar Carbothermal Reduction of Magnesia as a Production Process of Metal Fuels

Youssef Berro, Jean Puig, Marianne Balat-Pichelin
Publication date: November 2021
Page(s): 22-29
DOI: 10.11159/ijmmme.2021.003

Volume 6 - 2020

The influence of fuel surface roughness on ignition in the mining industry – an exploratory analysis

Rickard Hansen, Nicholas Dembsey
Publication date: January 2020
Page(s): 1-17
DOI: 10.11159/ijmmme.2020.001

Optimization of Processing parameters on Low Temperature Plasma Nitriding of AISI 420 Martensitic Stainless Steel

Insup Lee
Publication date: February 2020
Page(s): 18-26
DOI: 10.11159/ijmmme.2020.002

Influence of Sn on practical performances of structural steels

Kazuki Inujima, Kazutoshi Ichikawa
Publication date: March 2020
Page(s): 27-34
DOI: 10.11159/ijmmme.2020.003

Study and Comparison of the Thermomechanical Response of Geopolymeric and Conventional Concretes

F.A. Huamán-Mamani, J.F. Gamarra-Delgado, J.J. Paredes-Paz, V.C. Bringas-Rodríguez, D.L. Mayta-Ponce, G.P. Rodríguez-Guillén
Publication date: October 2020
Page(s): 35-42
DOI: 10.11159/ijmmme.2020.004

Evaluation of Creep Parameters in Geopolymers Derived From Mining Industry Waste

F.A. Huamán-Mamani, J.F. Gamarra-Delgado, J.J. Paredes-Paz, V.C. Bringas-Rodríguez, D.L. Mayta-Ponce, G.P. Rodríguez-Guillén
Publication date: October 2020
Page(s): 43-51
DOI: 10.11159/ijmmme.2020.005

Mechanical and Thermomechanical Behavior Of Sic/Si Compounds Subjected To Controlled Atmospheric Conditions

J.F. Gamarra-Delgado, J.J. Paredes-Paz, V.C. Bringas-Rodríguez, D.L. Mayta-Ponce, G.P. Rodríguez-Guillén, F.A. Huamán-Mamani
Publication date: October 2020
Page(s): 52-59
DOI: 10.11159/ijmmme.2020.006

Volume 5 - 2019

Investigation of High Energy Single Pulse Effect on Micro Arc Oxidation (MAO) Process on Aluminium

Mustafa Safa Yilmaz, Orhan Sahin
Publication date: February 2019
Page(s): 1-6
DOI: TBA

Flotation of lithium ores to obtain high-grade Li2O concentrates. Are there any mineralogical limitations?

Rui Sousa, Violeta Ramos, Alexandra Guedes, Ana Botelho de Sousa, Fernando Noronha, Mário Machado Leite
Publication date: February 2019
Page(s): 7-18
DOI: TBA

Volume 4 - 2018

Accompanying Elements in Zinc Oxide Emitted into the Environment in Pyrometallurgical Process of Zinc and Lead Production

Zdzisław Adamczyk, Katarzyna Nowińska
Publication date: February 2018
Page(s): 1-5
DOI: TBA

The Economic Feasibility Study on Development of Coal Mine Using Real Options

Hyunbock Lee
Publication date: April 2018
Page(s): 6-13
DOI: TBA

Volume 3 - 2017

Hydrocyclone Phenomenological-Based Model and Feasible Operation Region

Diego A. Muñoz, Jenny L. Diaz, Sara Taborda, Hernan Alvarez
Publication date: September 2017
Page(s): 1-9
DOI: TBA

Volume 2 - 2016

Third-Body Wear Behavior of Orthopedic Biopolymers

Binnur Sagbas, M. Numan Durakbasa
Publication date: April 2016
Page(s): 1-7
DOI: TBA

Computational Analysis of Inter-Material Mixing and Weld-Flaw Formation during Dissimilar-Filler-Metal Friction Stir Welding (FSW)

M. Grujicic, R. Yavari, S. Ramaswami, J. S. Snipes, R. Galgalikar
Publication date: June 2016
Page(s): 8-19
DOI: TBA

Mineral Processing Analysis in Artisanal Gold Mining, Peru

Hernán Anticoi, Pura Alfonso, Marc Bascompta, Sílvia Palacios
Publication date: October 2016
Page(s): 20-23
DOI: TBA

Mineralogical Characterisation of Tantalum Ores for the Optimization of their Processing

Pura Alfonso, Josep Oliva, Maite Garcia-Valles, Oriol Tomasa, Daniel Calvo, Eduard Guasch, Hernán Anticoi, David Parcerisa
Publication date: October 2016
Page(s): 24-28
DOI: TBA

Volume 1 - 2015

Acceleration Field of Ground Vibrations and Anisotropy of Wave Propagation

Piotr Bańka
Publication date: November 2015
Page(s): 1-10
DOI: TBA

Morphological Character and Floatability of Blasted Talc Particles

Onur Güven, Fırat Karakaş, Gökhan Yaşar, Mehmet S. Çelik
Publication date: December 2015
Page(s): 11-15
DOI: TBA